Trevi

  • Ονομασίες :
Thickness Oak layer Widths Lengths *
Relief 3D
16 mm
4 mm
180, 220, 250 mm
300 mm**
1.8 to 3 m
Country
12 mm
approx. 3 mm
140 mm
1.6 to 3 m
Country
16 mm
4 mm
180 & 220 mm
1.8 to 3 m
Classic
16 mm
4 mm
180 mm
1.8 to 3 m
Select
16 mm
4 mm
180 & 200 mm
1.8 to 3 m

Glue is approx. 1mm
* depending on stock, with a maximum of 20 % starter lengths
** on request

Grades

Trevi is available in our various finishes: Relief 3D, Country, Classic and Select.

Structure

We use waterproof glued birch plywood as a carrier material. On top of this we glue a sawn top layer of solid oak. The connection is made with a traditional tongue and groove system to avoid the unpleasant creaking noises of click connections. The edges on the long side are slightly chamfered. For aesthetic reasons, we do not use a bevel on the front side, because the bevel on the front side visually shortens the planks, an extremely undesirable effect.

Finish

Trevi consists of two layers of the highest quality, traditionally produced water-based varnish. We do not use UV curing at all, which would significantly reduce production costs, but also entails major compromises in quality. The stain resistance of Trevi is extremely good. Even coffee, cola, wine or kernel oil cannot harm Trevi. However, we recommend removing liquids as quickly as possible.

Maintenance

Maintenance consists primarily of vacuuming and mopping. Make sure that you use vacuum cleaner attachments suitable for parquet.

Skirting boards

We manufacture color matching skirting boards for you.

Installation

We recommend full-surface gluing by trained professionals.

place of manufacture

We produce in Graz. The raw material comes from sustainable forestry in Eastern Europe.